Publications
Now showing items 401-420 of 680
Chapter Innovation of Textiles through Natural By-Products and Wastes
(2020)
Nowadays, the competitiveness of the textile industry and the consumers’ interest have been increasing the demand for innovative and functional textiles. Allied to this, sustainable developments are playing an increasingly ...
Chapter Bayesian Approach for X-Ray and Neutron Scattering Spectroscopy
(2020)
The rapidly improving performance of inelastic scattering instruments has prompted tremendous advances in our knowledge of the high-frequency dynamics of disordered systems, yet also imposing new demands to the data analysis ...
Chapter Challenges and New Frontiers in the Paediatric Drug Discovery and Development
(2020)
Drug discovery and development advances in the last decades allowed to find a treatment for many preventable diseases. However, all too often, children are excluded from these progresses since most of the new medicines ...
Chapter Fly Ash as a Cementitious Material for Concrete
(2020)
This paper presents a review on fly ash as prime materials used for geopolymer. Due to its advantages of abundant resources, less in cost, great workability and high physical properties, fly ash leads to achieving high ...
Chapter Earth Observation Technologies: Low-End-Market Disruptive Innovation
(2020)
After decades of traditional space businesses, the space paradigm is changing. New approaches to more efficient missions in terms of costs, design, and manufacturing processes are fostered. For instance, placing big ...
Chapter Deep Learning Training and Benchmarks for Earth Observation Images: Data Sets, Features, and Procedures
(2020)
Deep learning methods are often used for image classification or local object segmentation. The corresponding test and validation data sets are an integral part of the learning process and also of the algorithm performance ...
Chapter Is Induced Abortion a Part of Family Planning in China
(2020)
Family planning policy is one of the basic policies in China. Since the founding of New China, it has gone through three stages during its development process, which include free fertility policy, one-child policy (including ...
Chapter Hydrothermal Synthesis of Zinc Tin Oxide Nanostructures for Photocatalysis, Energy Harvesting and Electronics
(2020)
The massification of Internet of Things (IoT) and Smart Surfaces has increased the demand for nanomaterials excelling at specific properties required for their target application, but also offering multifunctionality, ...
Chapter Fast-Spectrum Fluoride Molten Salt Reactor (FFMSR) with Ultimately Reduced Radiotoxicity of Nuclear Wastes
(2020)
A mixture of NaF-KF-UF4 eutectic and NaF-KF-TRUF3 eutectic containing heavy elements as much as 2.8 g/cc makes a fast-spectrum molten salt reactor based upon the U-Pu cycle available without a blanket. It does not object ...
Chapter Transport Protocol Performance and Impact on QoS while on the Move in Current and Future Low Latency Deployments
(2018)
Transport protocols and mobile networks have evolved independently leading to a lack of adaptability and quality of service (QoS) degradation while running under the variability circumstances present in cellular access. ...
Chapter Mechanisms of Charge Transport and Photoelectric Conversion in CdTe-Based X- and Gamma-Ray Detectors
(2018)
This chapter deals with (i) the charge transport mechanisms in X- and gamma-ray detectors both Ohmic and Schottky types based on CdTe and its alloys with an almost intrinsic conductivity (the peculiarities of the formation ...
Chapter Strengths and Weaknesses for Climate Change: Adaptation in Water Governance: A Comparison Across Six European Regions
(2018)
This chapter comparatively analyses the policy and governance contexts of six European regions that are affected by different hydrological impacts of climate change. The results demonstrate that a major governance strength ...
Chapter User Experience Results of Setting Free a Service Robot for Older Adults at Home
(2018)
The chapter presents the analysis of user trials where, for the first time, a service robot was set free in the home of users. Different to previous studies there was no pre-specified schedule of tasks to execute. The goal ...
Chapter Effects of Water Scarcity on the Performances of the Agricultural Sector and Adaptation Strategies in Tunisia
(2019)
The chapter aims to develop a regionally disaggregated agricultural supply model for Tunisia in order to investigate the potential effects of increasing water scarcity on the performances of the agricultural sector in the ...
Chapter Potentials and Challenges of Additive Manufacturing Technologies for Heat Exchanger
(2019)
The rapid development of additive manufacturing (AM) technologies enables a radical paradigm shift in the construction of heat exchangers. In place of a layout limited to the use of planar or tubular starting materials, ...
Chapter Additive Manufacturing Applied to the Design of Small Satellite Structure for Space Debris Reduction
(2019)
Space debris has become a major aspect in the last few years. The vast amount of artificial objects orbiting the Earth is increasing. These objects are a threat for active and future missions. Besides, the possibility of ...
Chapter Introductory Chapter: Why Do We Need Rapid Detection of Pathogens?
(2018)
Biotechnology
Chapter Introductory Chapter: Agricultural Waste as a Source of Raw Materials
(2018)
Agricultural science
Chapter Estimating the Effect of Voters’ Media Awareness on the 2016 US Presidential Election
(2019)
We examine whether voter media awareness of the 2016 US Presidential election campaign influenced the election using a logit model to estimate the probability that a voter with certain characteristics votes for one of the ...
Chapter Value-Based Evaluation of Chinese Provincial Health Insurance Policy Schemes
(2020)
Since 2011, an international group of health policy experts has been working on a value-framework to be used for pharmaceutical policy decisions based on multicriteria decision analysis (MCDA). This tool can be easily ...